Product Specifications
Cabinet Dimensions |
|---|
| Width |
26 7/8" |
| Depth |
28" |
| Height |
43" |
| Work Surface Height |
43" |
| Basket Volume |
2.84 cu. ft. |
Finish |
|---|
| Color |
White, Bisque |
| Tub Finish |
Stainless Steel |
Operation |
|---|
| Cycles |
Normal/Hot, Perm Press/Warm, Delicate/Cold |
| Cycle Time |
25 minutes |
| Motor HP |
3/4 HP - 750 Amps |
| Motor RPM |
Inverter Drive |
| Electrical Specs |
120/60/1 - 15 Voltage/Hz/Phase/Amps |
| Spin Speeds |
500, 650, 1000 RPM |
| Water Consumption |
14.8 Gal/Cycle |
| Water Factor |
5.2 Gal/cu. ft. |
| Modified Energy Factor |
2.16 |
| Hot Water Usage |
1.59 Gal/Cycle |
| Water Pressure |
1.4 - 8.3 psi |
Shipping |
|---|
| Net Weight |
250 lb |
| Shipping Weight |
270 lb |
Agency Approvals |
|---|
| Agency Approvals |
UL |
For the most accurate information the
installation guide should be used for all design and construction
purposes. Due to continuous product improvements, design and
specifications subject to change without notice. The quality management
system of Alliance Laundry Systems' Ripon facility has been registered
to ISO 9001:2000.
Features & Benefits
- 2.84 cu. ft. washtub provides lots of room for larger loads
- Electronically
controlled motor, with out-of-balance logic, manages and redistributes
unbalanced loads for uninterrupted wash cycles
- High spin speed of over 1000 RPM means less water left in clothes for faster drying cycles and lower energy usage in the dryer
Available Controls
Control | Description |
|---|
Micro-Display | Our
Micro-Display Control (MDC) shows vend price, while customers stay
informed about the wash process through cycle status lights and a
digital cycle countdown. MDC offers four cycle selections and comes
with a single coin drop installed. The control also can interface with
a variety of aftermarket card reader systems. |
Coin Front Load Washer SWFT71